Ductwork & ventilation
Sealing, balancing, replacing, and re-routing residential ductwork — including the basement runs the original installer skipped.
- Pricing
- Targeted ductwork balancing and sealing …
- Response
- Most projects scheduled within 2 – 3 weeks
- Warranty
- 5-year warranty on sealing work
- Brands
- Multi-brand
Most comfort complaints aren't equipment problems — they're duct problems. We pressure-test and seal trunk lines, replace flex with rigid where it matters, balance airflow room-by-room with anemometer readings (not by ear), and rework returns when the home is starved. We can also rough in ducts during a renovation and coordinate with your GC.
Manual D layout
We design new ductwork using ACCA Manual D, not eyeballing trunk sizes.
Aeroseal capable
For finished homes we partner with Aeroseal applicators to seal from inside the system.
Room-by-room balancing
Every commissioning includes airflow measurement at each register.
Renovation coordination
We can rough in during framing and finish at trim — your GC will love us.
What's included, what's not, and what it'll cost.
- Pre-work pressure test and airflow measurement
- Mastic sealing of accessible joints
- Replacement of failing flex runs with rigid metal
- New supply or return drops as required
- Damper installation for room balancing
- Post-work verification report
Not included
- Drywall reconstruction (rough-cut access only — finishing trade follows)
- Asbestos-containing duct insulation removal (specialist trade)
Pricing
Targeted ductwork balancing and sealing usually runs $1,200 – $2,800. Full re-runs during a renovation are scoped per project — typically $5,000 – $14,000 depending on the size of the home and access.
Response
Most projects scheduled within 2 – 3 weeks
Warranty
5-year warranty on sealing work
Four steps. Same four every job.
Step 1
1. Inspection
Pressure test, register-by-register airflow read, return audit.
Step 2
2. Plan
Targeted seal, partial replacement, full Manual D redesign — we'll quote what's actually needed, not the maximum.
Step 3
3. Work
Mostly basement work, sometimes drop ceilings or chases. Drop sheets and dust-control go up first.
Step 4
4. Verify
Re-measure airflow at every register and seal any leftover leaks. You get a balanced-airflow report.
While we're here, ask about these too.
Furnace installation & repair
Two-stage and modulating gas furnaces installed properly, repairs that don't come back next month.
Indoor air quality
MERV upgrades, HRV/ERV installs, humidification, and UV — paired only when your house actually needs them.
Maintenance plans
A spring AC tune-up, a fall furnace tune-up, and 24/7 priority booking — for less than the cost of one no-heat call in February.
Ready for a ductwork & ventilation quote?
Free in-home visit, written quote within 48 hours, no upsell scripts.
